ADJUSTME is a Danish sub-supplier of electrical height adjustable sit stand desk to manufacturers and nationwide distributors with own brand. We don’t distribute to the dealer market.
In case you want to “Swan-label” your end-product we have already prepared all answers to the given forms. Please contact us for further information.
Our frames are easily disposed of by dividing them into different waste groups for recycling or combustion. Please download the below PDF for our guidelines and recommendations for disposal of frames
The package box materials are made of cardboard, this includes both the larger shipping box and the smaller boxes within containing screws.
The protection material inside the box is made of honeycomb
This means that our packaging is sustainable, does not need to be source sorted and is burnable
Standard packaging
Honeycomb packaging
In 2018 we launched our anti-collision technology.
Integrating this gyro based technology from IPhone and iPad into height adjustable desk – as the very first in our industry – we offer a sensitive anti – collision system, which is working independently of load and temperature.
Sensi touch is much more sensitive and stable than software-based detection and the sensitivity can be adjusted by the handset. It can detect if a system has collided with an object, fallen out-of-sync with the other legs of the desk, or shifted during operation. If one of these conditions is met, sensi touch immediately sends the control box a command to stop and reverse the desk in opposite direction.
We offer 12 different standard colors. Please download the below PDF for further information of possible color choices.
Programmable and Up/down
NB: The setting of your highest / lowest position will be overruled during reset: During reset the desk will go to lowest position configured by factory. After reset the desk will remember your settings of highest/lowest position.
Setting new highest position:
• 1. Press ▲ and ▼buttons together for a sec.
• 2. Release ▼ button – meaning you still press button ▲
• 3. Press ▼ 3 times
• 4. You will hear a “beep” – Done
Setting new lowest position:
• 1. Press ▲ and ▼ buttons together for a sec.
• 2. Release ▲ button – meaning you still press button ▼
• 3. Press ▲ 3 times
• 4. You will hear a “beep” – Done
Programmable
Press both ▲ and ▼ buttons at the same time for 3 seconds. Continue pressing the buttons until both columns are in lowest position. When finish reset, the control box makes a beep and the buttons can be released.
When conducting reset, the display shows ”000” in last 100mm stroke. When finish reset, the display shows starting height again.
If releasing ▲ and ▼ buttons before the display shows ”000”, the desk goes back to normal operation. If releasing ▲ and ▼ buttons after the display shows ”000”, the user has to finish the reset to go back to normal operation.
Reset is necessary at first operation of the desk.
Up/down
Press both ▲ and ▼ buttons at the same time for 3 seconds. Continue pressing the buttons until both columns are in lowest position. Keep pressing the buttons until control box makes 1 beep. When control box makes 1 beep, it is confirmed that reset has been completed and buttons can be released. Now the desk is operational.
If the desk is disconnected by accidently pulling out the plugs at the control box, motors, handset, main power source or system status reach overload, overheat etc. then the desk must be reset. If the desk is powered off intentionally at the main power switch, then the desk does not need to be reset.
20′
The following PDF contains information about a 20′ full load container.
Download TEK01-04S-2349-027 20′ PDF
Download TEK01-13S-2349-027 20′ PDF
40′
The following PDF contains information about a 40′ full load container.
LCL (Less Container Load) minimum 60 set.
Information concerning the weight of the products can be found in the PDF below